QT Series Hydraulic Gear Pump For Forging Machinery And Elevators
| Shaft Length: | 45.0 LB |
| Major Diameter [Max: | Flange Mount |
| Cover End Pressure [Max: | Left Hand (CCW) |
| Minor Diameter [Min: | 2520V21A12-1AA22L |
| Port Type: | 2 1/2 |
| Mounting Flange: | Flange |
| Port Orientation - Cover End: | 1/4 in |
| Relief Valve Setting: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Length | 45.0 LB |
| Major Diameter [Max | Flange Mount |
| Cover End Pressure [Max | Left Hand (CCW) |
| Minor Diameter [Min | 2520V21A12-1AA22L |
| Port Type | 2 1/2 |
| Mounting Flange | Flange |
| Port Orientation - Cover End | 1/4 in |
| Relief Valve Setting | Standard Pilot |
| Shaft End RPM [Max | 0.875 in |
| Displacement Shaft End (cu in/revolution) | Straight w/ Key |
| Shaft Type | 2520V |
| Minor Diameter [Max | 2.32 in |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Pump Series | 1800 |
| Shaft Key | N/A |
| Port Size | SAE B, 2 Bolt |
| Model No. | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | N/A |
| Pilot Type | 1800 |
| Pressure Port Size, Cover End | 1800 |
| Pressure Port Size, Shaft End | N/A |
| Cover End Flow @ RPM | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Spline Description | N/A |
| Cover End RPM [Max | N/A |
| Shaft Seal Type | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Minor Diameter | N/A |
| Shaft End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight | 2520V21A12-1AA22L |
| Rotation | 3000 |
| Major Diameter [Min | 2500 |
| Manufacturer Part No. | 18 |
| Integral Valve Configuration | 31.5 |
| Shaft End Flow @ RPM | N/A |
| Port Orientation - Shaft End | Outlet 135° CCW from Inlet |
| Shaft Dia. | Outlet Opposite Inlet |
| Mounting | 3/4 in Code 61 |
| Controlled Flow Rate | 1 in Code 61 |
| Max. RPM [Max | 2.5 |
| Seal Material | 4.1 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance