Blow Molding Machine Sumitomo Gear Pump With Low Pressure Pulsation
| Port Type: | 101.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): | 11.8 |
| Shaft Key: | 3.5 |
| Weight: | Flange |
| Manufacturer Part No.: | N/A |
| Max. RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Port Type | 101.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Shaft Key | 3.5 |
| Weight | Flange |
| Manufacturer Part No. | N/A |
| Max. RPM [Max | Standard Pilot |
| Shaft Length | 1.25 in |
| Mounting Flange | 14 Tooth Splined |
| Minor Diameter [Max | 4525VQ |
| Cover End RPM [Max | 1.9375 in |
| Pump Series | Double |
| Spline Description | Buna-N |
| Shaft Dia. | 2200 |
| Shaft End Flow @ RPM | 1.04 in |
| Major Diameter [Max | SAE C, 2 Bolt |
| Rotation | Single Shaft Seal |
| Seal Material | 12/24 |
| Integral Valve Configuration | 2200 |
| Port Orientation - Shaft End | 2200 |
| Port Size | N/A |
| Shaft Seal Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 1.248 in |
| Port Orientation - Cover End | 1.247 in |
| Mounting | N/A |
| Pilot Type | N/A |
| Major Diameter [Min | N/A |
| Shaft End RPM [Max | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 4525VQ60A21-11CC20 |
| Cover End Pressure [Max | 3000 |
| Minor Diameter | 2500 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| Pressure Port Size, Cover End | 90 |
| Shaft Type | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 45° CW from Inlet |
| Model No. | Outlet Inline w/Inlet |
| Displacement Cover End (cu in/revolution) | 1 in Flange |
| Minor Diameter [Min | 1 1/2 in Flange |
| Relief Valve Setting | 4.1 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance