Sumitomo QT52-63 Hydraulic Gear Pump With High Running Wear Resistance
| Shaft Dia.: | 30.0 LB |
| Displacement Shaft End (cu in/revolution): | 1.8 |
| Relief Valve Setting: | Right Hand (CW) |
| Minor Diameter [Min: | V2010-1F9S7S-11CC12 |
| Shaft Type: | 1.5 |
| GPM @ 1,800 rpm, Shaft End: | Flange |
| Pilot Type: | N/A |
| Weight: | N/A |
| PDF |
|
Product Details
| Shaft Dia. | 30.0 LB |
| Displacement Shaft End (cu in/revolution) | 1.8 |
| Relief Valve Setting | Right Hand (CW) |
| Minor Diameter [Min | V2010-1F9S7S-11CC12 |
| Shaft Type | 1.5 |
| GPM @ 1,800 rpm, Shaft End | Flange |
| Pilot Type | N/A |
| Weight | N/A |
| Major Diameter [Max | 0.875 in |
| Max. RPM [Max | 13 Tooth Splined |
| Mounting | V2010 |
| Port Orientation - Shaft End | 1.3125 in |
| Cover End RPM [Max | Double |
| Rotation | Buna-N |
| Displacement Cover End (cu in/revolution) | 2800 |
| Mounting Flange | 0.728 in |
| Manufacturer Part No. | SAE B, 2 Bolt |
| Pump Series | Single Shaft Seal |
| Minor Diameter | 16/32 |
| Shaft Seal Type | 2800 |
| Shaft Length | 2800 |
| Port Type | N/A |
| Pressure Port Size, Shaft End | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| GPM @ 1,800 rpm, Cover End | 0.872 in |
| Port Orientation - Cover End | 0.734 in |
| Controlled Flow Rate | 0.723 in |
| Shaft End Pressure [Max | N/A |
| Shaft End RPM [Max | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | V2010-1F9S7S-11CC12 |
| Pressure Port Size, Cover End | 2000 |
| Cover End Flow @ RPM | 2500 |
| Major Diameter [Min | 10.5 |
| Seal Material | 13.5 |
| Minor Diameter [Max | N/A |
| Shaft Key | Outlet 45° CW from Inlet |
| Port Size | Outlet Inline w/Inlet |
| Cover End Pressure [Max | 1/2 in SAE O-Ring |
| Model No. | 3/4 in SAE O-Ring |
| Integral Valve Configuration | 1.4 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance