25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise
| Major Diameter [Min: |
45.0 LB |
| Pressure Port Size, Cover End: |
Flange Mount |
| Port Orientation - Cover End: |
Right Hand (CW) |
| Pilot Type: |
2520VQ17A8-11DC20 |
| Shaft End RPM [Max: |
2 1/2 |
| Shaft Dia.: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Displacement Cover End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Min |
45.0 LB |
| Pressure Port Size, Cover End |
Flange Mount |
| Port Orientation - Cover End |
Right Hand (CW) |
| Pilot Type |
2520VQ17A8-11DC20 |
| Shaft End RPM [Max |
2 1/2 |
| Shaft Dia. |
Flange |
| Shaft End Pressure [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
Standard Pilot |
| Manufacturer Part No. |
0.875 in |
| Shaft Seal Type |
13 Tooth Splined |
| Port Type |
2520VQ |
| Rotation |
1 3/8 in |
| Port Size |
Buna-N |
| Cover End Pressure [Max |
2500 |
| Cover End RPM [Max |
0.715 in |
| Minor Diameter [Min |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Shaft Key |
16/32 |
| Shaft Type |
2700 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Minor Diameter |
N/A |
| Integral Valve Configuration |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
0.873 in |
| Spline Description |
0.872 in |
| Controlled Flow Rate |
N/A |
| Major Diameter [Max |
N/A |
| Relief Valve Setting |
N/A |
| Seal Material |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Mounting Flange |
2520VQ17A8-11DC20 |
| Max. RPM [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Shaft End Flow @ RPM |
12 |
| Model No. |
25.5 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Pump Series |
Outlet 45° CW from Inlet |
| Weight |
Outlet 90° CW from Inlet |
| Cover End Flow @ RPM |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Minor Diameter [Max |
1.67 |
| Shaft Length |
3.37 |