Eaton Hydraulic Vane Motor 25M 35M 45M 50M With Dual Pressure Plate
| Port Orientation - Cover End: |
75.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| Shaft Length: |
3520VQ25A8-1AA20 |
| Pressure Port Size, Shaft End: |
3 |
| Pump Series: |
Flange |
| Relief Valve Setting: |
5/16 in |
| Cover End Pressure [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End |
75.0 LB |
| Max. RPM [Max |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| Shaft Length |
3520VQ25A8-1AA20 |
| Pressure Port Size, Shaft End |
3 |
| Pump Series |
Flange |
| Relief Valve Setting |
5/16 in |
| Cover End Pressure [Max |
Standard Pilot |
| Displacement Cover End (cu in/revolution) |
1.25 in |
| Mounting Flange |
Straight w/ Key |
| Shaft End Flow @ RPM |
3520VQ |
| Port Size |
2.5 in |
| Shaft Key |
Buna-N |
| Cover End Flow @ RPM |
2500 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Displacement Shaft End (cu in/revolution) |
SAE C, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Model No. |
2500 |
| Minor Diameter [Max |
2500 |
| Mounting |
N/A |
| Rotation |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Shaft Type |
N/A |
| Manufacturer Part No. |
N/A |
| Weight |
N/A |
| Major Diameter [Min |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
3520VQ25A8-1AA20 |
| Shaft End RPM [Max |
3000 |
| Port Type |
3000 |
| Spline Description |
12 |
| Controlled Flow Rate |
37.5 |
| Pressure Port Size, Cover End |
w/o Integral Valves |
| Pilot Type |
Outlet 135° CCW from Inlet |
| Shaft Dia. |
Outlet Opposite Inlet |
| Minor Diameter [Min |
3/4 in Flange |
| Shaft Seal Type |
1 1/4 in Flange |
| Seal Material |
1.67 |
| Integral Valve Configuration |
4.98 |