Eaton Hydraulic Vane Motor 25M 35M 45M 50M With Dual Pressure Plate
| Port Orientation - Cover End: | 75.0 LB |
| Max. RPM [Max: | Flange Mount |
| Port Orientation - Shaft End: | Right Hand (CW) |
| Shaft Length: | 3520VQ25A8-1AA20 |
| Pressure Port Size, Shaft End: | 3 |
| Pump Series: | Flange |
| Relief Valve Setting: | 5/16 in |
| Cover End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End | 75.0 LB |
| Max. RPM [Max | Flange Mount |
| Port Orientation - Shaft End | Right Hand (CW) |
| Shaft Length | 3520VQ25A8-1AA20 |
| Pressure Port Size, Shaft End | 3 |
| Pump Series | Flange |
| Relief Valve Setting | 5/16 in |
| Cover End Pressure [Max | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 1.25 in |
| Mounting Flange | Straight w/ Key |
| Shaft End Flow @ RPM | 3520VQ |
| Port Size | 2.5 in |
| Shaft Key | Buna-N |
| Cover End Flow @ RPM | 2500 |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Displacement Shaft End (cu in/revolution) | SAE C, 2 Bolt |
| Major Diameter [Max | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | N/A |
| Model No. | 2500 |
| Minor Diameter [Max | 2500 |
| Mounting | N/A |
| Rotation | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | N/A |
| Minor Diameter | N/A |
| Shaft Type | N/A |
| Manufacturer Part No. | N/A |
| Weight | N/A |
| Major Diameter [Min | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 3520VQ25A8-1AA20 |
| Shaft End RPM [Max | 3000 |
| Port Type | 3000 |
| Spline Description | 12 |
| Controlled Flow Rate | 37.5 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Pilot Type | Outlet 135° CCW from Inlet |
| Shaft Dia. | Outlet Opposite Inlet |
| Minor Diameter [Min | 3/4 in Flange |
| Shaft Seal Type | 1 1/4 in Flange |
| Seal Material | 1.67 |
| Integral Valve Configuration | 4.98 |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise