High Pressure Yuken Vane Pump , Low Noise Yuken Hydraulic Unit
| GPM @ 1,800 rpm, Cover End: |
32.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Shaft Type: |
Right Hand (CW) |
| Integral Valve Configuration: |
12 gal/min @ 1200 rpm |
| Cover End RPM [Max: |
25VQ12C-1C20 |
| Port Orientation - Cover End: |
1.5 |
| Pump Series: |
Flange |
| Seal Material: |
3/16 in |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Cover End |
32.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Shaft Type |
Right Hand (CW) |
| Integral Valve Configuration |
12 gal/min @ 1200 rpm |
| Cover End RPM [Max |
25VQ12C-1C20 |
| Port Orientation - Cover End |
1.5 |
| Pump Series |
Flange |
| Seal Material |
3/16 in |
| Major Diameter [Max |
20 |
| Port Orientation - Shaft End |
12 gpm @ 1200 rpm |
| Relief Valve Setting |
1 |
| Weight |
0.875 in |
| Port Type |
Straight w/ Key |
| Controlled Flow Rate |
18 gpm @ 1800 rpm |
| Shaft Key |
25VQ |
| Pressure Port Size, Shaft End |
2.31 in |
| Shaft Seal Type |
Single |
| Cover End Pressure [Max |
None |
| Cover End Flow @ RPM |
SAE-16 |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Minor Diameter |
2700 |
| Shaft End Pressure [Max |
3000 psi |
| Pilot Type |
18 |
| Max. RPM [Max |
C |
| Displacement Shaft End (cu in/revolution) |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Spline Description |
Inline w/ Inlet |
| Shaft End Flow @ RPM |
25VQ12C-1C20 |
| Manufacturer Part No. |
2.5 |
| Shaft End RPM [Max |
w/o Integral Valves |