Sumitomo QT52-63 Hydraulic Gear Pump With High Running Wear Resistance
| Shaft Dia.: |
30.0 LB |
| Displacement Shaft End (cu in/revolution): |
1.8 |
| Relief Valve Setting: |
Right Hand (CW) |
| Minor Diameter [Min: |
V2010-1F9S7S-11CC12 |
| Shaft Type: |
1.5 |
| GPM @ 1,800 rpm, Shaft End: |
Flange |
| Pilot Type: |
N/A |
| Weight: |
N/A |
| PDF |
|
Product Details
| Shaft Dia. |
30.0 LB |
| Displacement Shaft End (cu in/revolution) |
1.8 |
| Relief Valve Setting |
Right Hand (CW) |
| Minor Diameter [Min |
V2010-1F9S7S-11CC12 |
| Shaft Type |
1.5 |
| GPM @ 1,800 rpm, Shaft End |
Flange |
| Pilot Type |
N/A |
| Weight |
N/A |
| Major Diameter [Max |
0.875 in |
| Max. RPM [Max |
13 Tooth Splined |
| Mounting |
V2010 |
| Port Orientation - Shaft End |
1.3125 in |
| Cover End RPM [Max |
Double |
| Rotation |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2800 |
| Mounting Flange |
0.728 in |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Minor Diameter |
16/32 |
| Shaft Seal Type |
2800 |
| Shaft Length |
2800 |
| Port Type |
N/A |
| Pressure Port Size, Shaft End |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Spline Description |
0.873 in |
| GPM @ 1,800 rpm, Cover End |
0.872 in |
| Port Orientation - Cover End |
0.734 in |
| Controlled Flow Rate |
0.723 in |
| Shaft End Pressure [Max |
N/A |
| Shaft End RPM [Max |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
V2010-1F9S7S-11CC12 |
| Pressure Port Size, Cover End |
2000 |
| Cover End Flow @ RPM |
2500 |
| Major Diameter [Min |
10.5 |
| Seal Material |
13.5 |
| Minor Diameter [Max |
N/A |
| Shaft Key |
Outlet 45° CW from Inlet |
| Port Size |
Outlet Inline w/Inlet |
| Cover End Pressure [Max |
1/2 in SAE O-Ring |
| Model No. |
3/4 in SAE O-Ring |
| Integral Valve Configuration |
1.4 |