QT Series Hydraulic Gear Pump For Forging Machinery And Elevators
| Shaft Length: |
45.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Cover End Pressure [Max: |
Left Hand (CCW) |
| Minor Diameter [Min: |
2520V21A12-1AA22L |
| Port Type: |
2 1/2 |
| Mounting Flange: |
Flange |
| Port Orientation - Cover End: |
1/4 in |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Length |
45.0 LB |
| Major Diameter [Max |
Flange Mount |
| Cover End Pressure [Max |
Left Hand (CCW) |
| Minor Diameter [Min |
2520V21A12-1AA22L |
| Port Type |
2 1/2 |
| Mounting Flange |
Flange |
| Port Orientation - Cover End |
1/4 in |
| Relief Valve Setting |
Standard Pilot |
| Shaft End RPM [Max |
0.875 in |
| Displacement Shaft End (cu in/revolution) |
Straight w/ Key |
| Shaft Type |
2520V |
| Minor Diameter [Max |
2.32 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Pump Series |
1800 |
| Shaft Key |
N/A |
| Port Size |
SAE B, 2 Bolt |
| Model No. |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pilot Type |
1800 |
| Pressure Port Size, Cover End |
1800 |
| Pressure Port Size, Shaft End |
N/A |
| Cover End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Spline Description |
N/A |
| Cover End RPM [Max |
N/A |
| Shaft Seal Type |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Minor Diameter |
N/A |
| Shaft End Pressure [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight |
2520V21A12-1AA22L |
| Rotation |
3000 |
| Major Diameter [Min |
2500 |
| Manufacturer Part No. |
18 |
| Integral Valve Configuration |
31.5 |
| Shaft End Flow @ RPM |
N/A |
| Port Orientation - Shaft End |
Outlet 135° CCW from Inlet |
| Shaft Dia. |
Outlet Opposite Inlet |
| Mounting |
3/4 in Code 61 |
| Controlled Flow Rate |
1 in Code 61 |
| Max. RPM [Max |
2.5 |
| Seal Material |
4.1 |