Rexroth S20P...1X check valve
High Quality Rexroth S20P...1X check valve. Competitive Rexroth check valve 14 Width T(mm) Pricing. Accept Small Deep Groove Ball Bea Bearing Used Order. RTA Pump Development Co., Ltd. Easy Available Volume Discount and Fast Shipping.
| Brand Name: | Rexroth |
| Model Number: | S20P...1X |
| Shaft End Flow @ RPM: | 76.0 LB |
| Model No.: | Flange Mount |
| Port Orientation - Cover End: | Right Hand (CW) |
| Major Diameter [Min: | 3525VQ25A21-11DD20 |
| Pump Series: | 3 |
| Manufacturer Part No.: | Flange |
| Minor Diameter [Max: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
Product Details
| Shaft End Flow @ RPM | 76.0 LB |
| Model No. | Flange Mount |
| Port Orientation - Cover End | Right Hand (CW) |
| Major Diameter [Min | 3525VQ25A21-11DD20 |
| Pump Series | 3 |
| Manufacturer Part No. | Flange |
| Minor Diameter [Max | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 1.25 in |
| GPM @ 1,800 rpm, Cover End | 14 Tooth Splined |
| Minor Diameter | 3525VQ |
| Pressure Port Size, Shaft End | 1 15/16 in |
| Shaft Type | Buna-N |
| Cover End RPM [Max | 2500 |
| Major Diameter [Max | 1.04 in |
| Port Size | SAE C, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Port Type | 12/24 |
| Integral Valve Configuration | 2500 |
| Shaft End RPM [Max | 2500 |
| Pilot Type | N/A |
| Weight | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 1.248 in |
| Port Orientation - Shaft End | 1.247 in |
| Minor Diameter [Min | N/A |
| Controlled Flow Rate | N/A |
| Shaft Dia. | N/A |
| Shaft Seal Type | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Rotation | 3525VQ25A21-11DD20 |
| Seal Material | 3000 |
| Shaft Length | 3000 |
| Pressure Port Size, Cover End | 31.5 |
| Cover End Flow @ RPM | 37.5 |
| Spline Description | w/o Integral Valves |
| Max. RPM [Max | Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Mounting Flange | 1 in Flange |
| Shaft Key | 1 1/4 in Flange |
| Cover End Pressure [Max | 4.12 |
| Mounting | 4.98 |