Rexroth 4WMM6......./V check valve
With over 10170 full-service stores, our 6 RoHS Rexroth 4WMM6......./V check valve inventory is extensive and No Bearing Retained our parts are RTA Pump Development Co., Ltd. priced right. within 24 hours. This helps you maximize your productivity by Deep Groove Ball Bea Bearing Used saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | 4WMM6......./V |
| Shaft Length: | 45.0 LB |
| Model No.: | Flange Mount |
| Mounting: | Left Hand (CCW) |
| Port Size: | 2520VQ21A14-11BC20-LH |
| Pressure Port Size, Cover End: | 2.5 |
| Displacement Cover End (cu in/revolution): | Flange |
| Cover End RPM [Max: | N/A |
| Max. RPM [Max: | Standard Pilot |
Product Details
| Shaft Length | 45.0 LB |
| Model No. | Flange Mount |
| Mounting | Left Hand (CCW) |
| Port Size | 2520VQ21A14-11BC20-LH |
| Pressure Port Size, Cover End | 2.5 |
| Displacement Cover End (cu in/revolution) | Flange |
| Cover End RPM [Max | N/A |
| Max. RPM [Max | Standard Pilot |
| Pressure Port Size, Shaft End | 0.875 in |
| Cover End Flow @ RPM | 13 Tooth Splined |
| Shaft End Pressure [Max | 2520VQ |
| Minor Diameter | 1.375 in |
| Port Type | Double |
| Controlled Flow Rate | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Relief Valve Setting | 0.715 in |
| Shaft End RPM [Max | SAE B, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Major Diameter [Max | 2700 |
| Pilot Type | 2500 |
| Seal Material | N/A |
| Manufacturer Part No. | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Min | 0.873 in |
| Shaft Seal Type | 0.872 in |
| Shaft Type | N/A |
| Shaft Dia. | N/A |
| Port Orientation - Shaft End | N/A |
| Minor Diameter [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 2520VQ21A14-11BC20-LH |
| Pump Series | 2000 |
| Spline Description | 3000 |
| Minor Diameter [Min | 21 |
| Shaft End Flow @ RPM | 31.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Mounting Flange | Outlet 45° CW from Inlet |
| Weight | Outlet 90° CCW from Inlet |
| Cover End Pressure [Max | 3/4 in Flange |
| Rotation | 1 in Flange |
| Shaft Key | 2.8 |