Frequently bought Rexroth PVQ2-1X055RA15DLMB Vane pump together | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | m | C | D | T | B | J | d | |
| ZAXFM1055 | INA | 0,05 mm / Axial runout accuracy | 170 g / Weight | - | 55 mm / The bearing outer ring is blue anodised | - | 20 mm | 45 mm | 10 mm |
| XR882055 | Timken | - | - | - | 1117,6 mm | 82,55 mm | - | - | 901,7 mm |
| AST090 10550 | AST | - | - | - | 110 | - | - | - | 105 |
| XGB40550S03P | SNR | - | - | 39 mm | 83 mm | - | 39 mm | - | 45 mm |
| ZBL.30.1055.200-1SPTN | ISB | - | 10 mm | - | 1200 mm | - | - | - | 912 mm |
| ZBL.30.1055.201-2SPTN | ISB | - | 10 mm | - | 1198 mm | - | - | - | 912 mm |
| ZB1.25.0555.201-2SPTN | ISB | - | 8 mm | - | 655 mm | - | - | - | 416 mm |
| ZB1.25.1055.200-1SPTN | ISB | - | 10 mm | - | 1155 mm | - | - | - | 910 mm |
| ZB1.25.1055.201-2SPTN | ISB | - | 10 mm | - | 1155 mm | - | - | - | 910 mm |
| ZB1.25.0555.200-1SPTN | ISB | - | 8 mm | - | 655 mm | - | - | - | 416 mm |
| 70WR8055 | KOYO | - | - | 103 kN | 80 | - | 55 mm | - | 70 |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Shaft End Flow @ RPM:30.0 LB; Mounting Flange:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Port Size:V2010-1F8S1S-11CC12; Shaft Key:1 1/2; Minor Diameter [Max:Flange; Cover End Pressure [Max:N/A; Port Orientation - Cover End:N/A; Manufacturer Part No.:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Cover End Flow @ RPM:30.0 LB; Shaft End Pressure [Max:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F8S1S-11CC12; Mounting:1 1/2; Max. RPM [Max:Flange; Minor Diameter [Max:N/A; Shaft End Flow @ RPM:N/A; Displacement Cover End (cu in/revolution):0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Cover End Flow @ RPM:30.0 LB; Relief Valve Setting:Flange Mount; Pilot Type:Right Hand (CW); Port Orientation - Shaft End:V2010-1F8S1S-11CC12; Manufacturer Part No.:1 1/2; Shaft Seal Type:Flange; Shaft Dia.:N/A; Rotation:N/A; Weight:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Mounting Flange:30.0 LB; Minor Diameter [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2010-1F8S1S-11CC12; Port Orientation - Cover End:1 1/2; Major Diameter [Max:Flange; Pump Series:N/A; Port Orientation - Shaft End:N/A; Shaft Key:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Port Orientation - Shaft End:30.0 LB; Minor Diameter [Min:Flange Mount; Major Diameter [Min:Right Hand (CW); Controlled Flow Rate:V2010-1F8S1S-11CC12; Port Size:1 1/2; Spline Description:Flange; Shaft Seal Type:N/A; Pump Series:N/A; Pressure Port Size, Shaft End:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Cover End RPM [Max:30.0 LB; Cover End Pressure [Max:Flange Mount; Weight:Right Hand (CW); Minor Diameter [Max:V2010-1F8S1S-11CC12; Shaft Key:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Model No.:N/A; Max. RPM [Max:N/A; Shaft End Pressure [Max:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Pilot Type:30.0 LB; Shaft Seal Type:Flange Mount; Pump Series:Right Hand (CW); Controlled Flow Rate:V2010-1F8S1S-11CC12; Seal Material:1 1/2; Mounting Flange:Flange; Major Diameter [Max:N/A; Manufacturer Part No.:N/A; Pressure Port Size, Cover End:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Displacement Shaft End (cu in/revolution):30.0 LB; Port Type:Flange Mount; Shaft Length:Right Hand (CW); Minor Diameter [Max:V2010-1F8S1S-11CC12; Seal Material:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Controlled Flow Rate:N/A; Mounting Flange:N/A; Shaft Seal Type:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Port Orientation - Shaft End:30.0 LB; Controlled Flow Rate:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Weight:V2010-1F8S1S-11CC12; Cover End Pressure [Max:1 1/2; Pressure Port Size, Cover End:Flange; Manufacturer Part No.:N/A; Integral Valve Configuration:N/A; Minor Diameter [Min:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Cover End RPM [Max:30.0 LB; Pilot Type:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Model No.:V2010-1F8S1S-11CC12; Integral Valve Configuration:1 1/2; Minor Diameter:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Pressure Port Size, Shaft End:N/A; Port Orientation - Cover End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S1S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.2; Displacement Shaft End (cu in/revolution):1.62; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth PVQ2-1X055RA15DLMB Vane pump Video