High Pressure Yuken Vane Pump , Low Noise Yuken Hydraulic Unit
| GPM @ 1,800 rpm, Cover End: | 32.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Shaft Type: | Right Hand (CW) |
| Integral Valve Configuration: | 12 gal/min @ 1200 rpm |
| Cover End RPM [Max: | 25VQ12C-1C20 |
| Port Orientation - Cover End: | 1.5 |
| Pump Series: | Flange |
| Seal Material: | 3/16 in |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Cover End | 32.0 LB |
| Minor Diameter [Max | Flange Mount |
| Shaft Type | Right Hand (CW) |
| Integral Valve Configuration | 12 gal/min @ 1200 rpm |
| Cover End RPM [Max | 25VQ12C-1C20 |
| Port Orientation - Cover End | 1.5 |
| Pump Series | Flange |
| Seal Material | 3/16 in |
| Major Diameter [Max | 20 |
| Port Orientation - Shaft End | 12 gpm @ 1200 rpm |
| Relief Valve Setting | 1 |
| Weight | 0.875 in |
| Port Type | Straight w/ Key |
| Controlled Flow Rate | 18 gpm @ 1800 rpm |
| Shaft Key | 25VQ |
| Pressure Port Size, Shaft End | 2.31 in |
| Shaft Seal Type | Single |
| Cover End Pressure [Max | None |
| Cover End Flow @ RPM | SAE-16 |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Minor Diameter | 2700 |
| Shaft End Pressure [Max | 3000 psi |
| Pilot Type | 18 |
| Max. RPM [Max | C |
| Displacement Shaft End (cu in/revolution) | SAE B, 2 Bolt |
| Mounting | Single Shaft Seal |
| Spline Description | Inline w/ Inlet |
| Shaft End Flow @ RPM | 25VQ12C-1C20 |
| Manufacturer Part No. | 2.5 |
| Shaft End RPM [Max | w/o Integral Valves |
High Pressure Yuken Vane Pump , Low Noise Yuken Hydraulic Unit