Daewoo Hydraulic Industrial Vane Pump T6 T7 Series With Low Noise
GPM @ 1,800 rpm, Shaft End: | 3/16 in |
Max. RPM [Max: | Standard Blue Paint |
Pilot Type: | Axial Piston Pumps |
Minor Diameter [Min: | PVM018 |
Shaft Dia.: | 33.0 LB |
Port Size: | Right Hand (CW) |
Port Orientation - Shaft End: | PVM018ER02AE01AAA07000000A0A |
Displacement Shaft End (cu in/revolution): | Tube Ports |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 3/16 in |
Max. RPM [Max | Standard Blue Paint |
Pilot Type | Axial Piston Pumps |
Minor Diameter [Min | PVM018 |
Shaft Dia. | 33.0 LB |
Port Size | Right Hand (CW) |
Port Orientation - Shaft End | PVM018ER02AE01AAA07000000A0A |
Displacement Shaft End (cu in/revolution) | Tube Ports |
Shaft Length | Open Circuit Axial |
GPM @ 1,800 rpm, Cover End | 1800 rpm |
Shaft End RPM [Max | 4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
Cover End Flow @ RPM | SAE-20 |
Cover End RPM [Max | 0.75 in |
Port Orientation - Cover End | 3/4 |
Pressure Port Size, Shaft End | Straight Keyed |
Shaft Type | 8.2 gpm @ 1750 rpm |
Pump Series | SAE-12 |
Major Diameter [Max | Electric Motor Speeds |
Weight | Pressure Compensator |
Model No. | 0.94 in |
Shaft End Flow @ RPM | End Port |
Shaft Key | Buna-N |
Seal Material | 3.25 in |
Minor Diameter | 8.2 |
Major Diameter [Min | SAE A, 2 Bolt |
Shaft Seal Type | 4 3/16 in |
Controlled Flow Rate | Adjustable Maximum Displacement Stop & Single Shaft Seal |
Relief Valve Setting | SAE 19-1 |
Port Type | 918 |
Displacement Cover End (cu in/revolution) | N/A |
Spline Description | 5000 |
Integral Valve Configuration | 22 hp |
Mounting Flange | PVM018ER02AE01AAA07000000A0A |
Pressure Port Size, Cover End | Single Pump, Non-Thru-Drive |
Minor Diameter [Max | 1.1 |
Cover End Pressure [Max | 62 |
Manufacturer Part No. | None |
Rotation | 5000 psi |
Shaft End Pressure [Max | 4000 |
Mounting | 4600 |
Pressure Compensator Setting | 70 Bar |