25M 35M 45M 50M Small High Speed Hydraulic Motors With High Pressure
| Cover End RPM [Max: | 45.0 LB |
| Mounting: | Flange Mount |
| Pilot Type: | Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: | 2520VQ14A12-11CC20 |
| Model No.: | 2 1/2 |
| Shaft Dia.: | Flange |
| Major Diameter [Max: | N/A |
| Pressure Port Size, Cover End: | Standard Pilot |
| PDF |
|
Product Details
| Cover End RPM [Max | 45.0 LB |
| Mounting | Flange Mount |
| Pilot Type | Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End | 2520VQ14A12-11CC20 |
| Model No. | 2 1/2 |
| Shaft Dia. | Flange |
| Major Diameter [Max | N/A |
| Pressure Port Size, Cover End | Standard Pilot |
| Minor Diameter [Min | 0.875 in |
| Port Type | 13 Tooth Splined |
| Minor Diameter | 2520VQ |
| Cover End Pressure [Max | 1.375 in |
| Port Orientation - Shaft End | Buna-N |
| Pressure Port Size, Shaft End | 2700 |
| Port Orientation - Cover End | 0.715 in |
| Displacement Shaft End (cu in/revolution) | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Pump Series | 16/32 |
| Shaft Length | 2700 |
| Shaft End Flow @ RPM | 2700 |
| Max. RPM [Max | N/A |
| Weight | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 0.873 in |
| Shaft End Pressure [Max | 0.872 in |
| Spline Description | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Integral Valve Configuration | N/A |
| Shaft Key | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Minor Diameter [Max | 2520VQ14A12-11CC20 |
| Manufacturer Part No. | 2300 |
| Mounting Flange | 3000 |
| Relief Valve Setting | 18 |
| Port Size | 21 |
| Major Diameter [Min | w/o Integral Valves |
| Controlled Flow Rate | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| Cover End Flow @ RPM | 3/4 in Flange |
| Seal Material | 1 in Flange |
| Rotation | 2.41 |
| Shaft Seal Type | 2.77 |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise