RENOWELL BMR Series Hydraulic Vane Motor With Two Inner Check Valves
Weight: | 76.0 LB |
Major Diameter [Max: | Flange Mount |
Shaft Key: | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End: | 3525V25A21-86DC22R |
Shaft Dia.: | 3 |
Displacement Shaft End (cu in/revolution): | Flange |
Spline Description: | 5/16 in |
Port Orientation - Shaft End: | Standard Pilot |
PDF |
|
Product Details
Weight | 76.0 LB |
Major Diameter [Max | Flange Mount |
Shaft Key | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End | 3525V25A21-86DC22R |
Shaft Dia. | 3 |
Displacement Shaft End (cu in/revolution) | Flange |
Spline Description | 5/16 in |
Port Orientation - Shaft End | Standard Pilot |
Major Diameter [Min | 1.375 in |
Integral Valve Configuration | Straight w/ Key |
Port Size | 3525V |
Pressure Port Size, Cover End | 3 7/8 in |
Port Orientation - Cover End | Buna-N |
Relief Valve Setting | 1800 |
Pressure Port Size, Shaft End | N/A |
Minor Diameter [Max | SAE C, 2 Bolt |
Shaft End Pressure [Max | Single Shaft Seal |
Pilot Type | N/A |
Shaft Length | 1800 |
Cover End RPM [Max | 1800 |
Rotation | N/A |
Displacement Cover End (cu in/revolution) | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Manufacturer Part No. | N/A |
Shaft Seal Type | N/A |
Port Type | N/A |
Max. RPM [Max | N/A |
Model No. | N/A |
Controlled Flow Rate | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 3525V25A21-86DC22R |
Seal Material | 2500 |
Pump Series | 2500 |
GPM @ 1,800 rpm, Cover End | 31.5 |
Mounting Flange | 37.5 |
Shaft Type | N/A |
Minor Diameter | Outlet 45° CW from Inlet |
Mounting | Outlet 90° CW from Inlet |
Cover End Pressure [Max | 1 in Code 61 |
Shaft End Flow @ RPM | 1 1/4 in Code 61 |
Minor Diameter [Min | 4.1 |
Cover End Flow @ RPM | 4.9 |