Renowell Rexroth Series Internal Gear Pump PGH3 PGH4 PGH5 With Energy Saving
| Shaft End RPM [Max: | 76.0 LB |
| Integral Valve Configuration: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Shaft Key: | 3525VQ30A21-11BB20 |
| GPM @ 1,800 rpm, Cover End: | 3 |
| Pressure Port Size, Shaft End: | Flange |
| Displacement Cover End (cu in/revolution): | N/A |
| Max. RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Shaft End RPM [Max | 76.0 LB |
| Integral Valve Configuration | Flange Mount |
| Rotation | Right Hand (CW) |
| Shaft Key | 3525VQ30A21-11BB20 |
| GPM @ 1,800 rpm, Cover End | 3 |
| Pressure Port Size, Shaft End | Flange |
| Displacement Cover End (cu in/revolution) | N/A |
| Max. RPM [Max | Standard Pilot |
| Minor Diameter [Max | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Major Diameter [Min | 3525VQ |
| Port Size | 1 15/16 in |
| Pressure Port Size, Cover End | Buna-N |
| Controlled Flow Rate | 2500 |
| Shaft End Pressure [Max | 1.04 in |
| Weight | SAE C, 2 Bolt |
| Seal Material | Single Shaft Seal |
| Major Diameter [Max | 12/24 |
| Shaft Dia. | 2500 |
| Pump Series | 2500 |
| Spline Description | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 1.248 in |
| Displacement Shaft End (cu in/revolution) | 1.247 in |
| Shaft Seal Type | N/A |
| Shaft Length | N/A |
| Minor Diameter [Min | N/A |
| Pilot Type | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Mounting | 3525VQ30A21-11BB20 |
| Shaft End Flow @ RPM | 3000 |
| Cover End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| Mounting Flange | 45 |
| Port Orientation - Cover End | w/o Integral Valves |
| Relief Valve Setting | Outlet 45° CCW from Inlet |
| Cover End Flow @ RPM | Outlet 90° CCW from Inlet |
| Cover End RPM [Max | 1 in Flange |
| Port Type | 1 1/4 in Flange |
| Manufacturer Part No. | 4.12 |
| Model No. | 5.96 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance