Sumitomo Internal Hydraulic Gear Pump Low Noise Performance For Servo System
| Mounting Flange: | 76.0 LB |
| Pilot Type: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: | 3525VQ30A21-11DC20-LH |
| Minor Diameter [Min: | 3 |
| Relief Valve Setting: | Flange |
| Minor Diameter [Max: | N/A |
| Pressure Port Size, Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange | 76.0 LB |
| Pilot Type | Flange Mount |
| Rotation | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End | 3525VQ30A21-11DC20-LH |
| Minor Diameter [Min | 3 |
| Relief Valve Setting | Flange |
| Minor Diameter [Max | N/A |
| Pressure Port Size, Shaft End | Standard Pilot |
| Shaft End Flow @ RPM | 1.25 in |
| Max. RPM [Max | 14 Tooth Splined |
| Port Type | 3525VQ |
| Displacement Cover End (cu in/revolution) | 1.9375 in |
| Spline Description | Double |
| Port Size | Buna-N |
| Integral Valve Configuration | 2500 |
| Shaft Dia. | 1.04 in |
| Cover End Flow @ RPM | SAE C, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Port Orientation - Cover End | 12/24 |
| Controlled Flow Rate | 2500 |
| Major Diameter [Min | 2500 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting | 1.248 in |
| Pump Series | 1.247 in |
| Minor Diameter | N/A |
| Shaft Key | N/A |
| Major Diameter [Max | N/A |
| Cover End RPM [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3525VQ30A21-11DC20-LH |
| Pressure Port Size, Cover End | 3000 |
| Shaft Type | 3000 |
| Shaft End Pressure [Max | 31.5 |
| Seal Material | 45 |
| Model No. | w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) | 6 |
| Shaft End RPM [Max | Outlet 90° CW from Inlet |
| Weight | 1 in Flange |
| Shaft Seal Type | 1 1/4 in Flange |
| Cover End Pressure [Max | 4.1 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance