Hydraulic Denison Vane Pumps 28Mpa Max Pressure For Engineering Machinery
| Model No.: | 45.0 LB |
| Weight: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Minor Diameter [Max: | 2520VQ21A14-11AD20 |
| Pilot Type: | 2 1/2 |
| Pressure Port Size, Cover End: | Flange |
| Minor Diameter: | N/A |
| Pump Series: | Standard Pilot |
| PDF |
|
Product Details
| Model No. | 45.0 LB |
| Weight | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Minor Diameter [Max | 2520VQ21A14-11AD20 |
| Pilot Type | 2 1/2 |
| Pressure Port Size, Cover End | Flange |
| Minor Diameter | N/A |
| Pump Series | Standard Pilot |
| Shaft Key | 0.875 in |
| Displacement Shaft End (cu in/revolution) | 13 Tooth Splined |
| Displacement Cover End (cu in/revolution) | 2520VQ |
| Port Type | 1 3/8 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Port Size | 2500 |
| Cover End Flow @ RPM | 0.715 in |
| Major Diameter [Max | SAE B, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Pressure Port Size, Shaft End | 16/32 |
| Shaft End RPM [Max | 2700 |
| Minor Diameter [Min | 2500 |
| Shaft End Pressure [Max | N/A |
| Mounting | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 0.873 in |
| Max. RPM [Max | 0.872 in |
| Port Orientation - Shaft End | N/A |
| Shaft Type | N/A |
| Cover End RPM [Max | N/A |
| Rotation | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 2520VQ21A14-11AD20 |
| Spline Description | 2000 |
| Shaft End Flow @ RPM | 3000 |
| Seal Material | 21 |
| Mounting Flange | 31.5 |
| Shaft Seal Type | w/o Integral Valves |
| Integral Valve Configuration | Outlet 135° CW from Inlet |
| Shaft Length | Outlet Opposite Inlet |
| Shaft Dia. | 3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1 in Flange |
| Relief Valve Setting | 2.8 |
| Major Diameter [Min | 4.12 |
Triple Cartridges Denison Vane Pumps For Heavy Equipments / Mining Machinery