BOSCH 0432191342 injector
Various BOSCH injector RTA Pump Development Co., Ltd. 5200 rpm Grease Speed Rating Open/Shielded n1 Snap-Ring Accessories types and sizes to accommodate your BOSCH 0432191342 injector requirements.
What is 0432191342 bearing cross reference？
| Brand Name: | BOSCH |
| Model Number: | 0432191342 |
| Shaft End RPM [Max: | 75.0 LB |
| Major Diameter [Max: | Flange Mount |
| Spline Description: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 3520VQ25A11-11CC20-LH |
| Pressure Port Size, Shaft End: | 3 |
| Mounting: | Flange |
| Cover End Flow @ RPM: | N/A |
| Seal Material: | Standard Pilot |
Product Details
| Shaft End RPM [Max | 75.0 LB |
| Major Diameter [Max | Flange Mount |
| Spline Description | Left Hand (CCW) |
| Pressure Port Size, Cover End | 3520VQ25A11-11CC20-LH |
| Pressure Port Size, Shaft End | 3 |
| Mounting | Flange |
| Cover End Flow @ RPM | N/A |
| Seal Material | Standard Pilot |
| Port Size | 1.25 in |
| Controlled Flow Rate | 14 Tooth Splined |
| Cover End Pressure [Max | 3520VQ |
| Port Orientation - Cover End | 1 15/16 in |
| Cover End RPM [Max | Double |
| Rotation | Buna-N |
| Port Type | 2500 |
| GPM @ 1,800 rpm, Shaft End | 1.04 in |
| Model No. | SAE C, 2 Bolt |
| Manufacturer Part No. | Single Shaft Seal |
| Relief Valve Setting | 12/24 |
| Shaft Type | 2500 |
| Shaft End Pressure [Max | 2500 |
| Minor Diameter [Max | N/A |
| Mounting Flange | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 5 |
| Shaft Key | 1.247 in |
| Shaft Dia. | N/A |
| Minor Diameter [Min | N/A |
| Weight | N/A |
| Displacement Cover End (cu in/revolution) | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 3520VQ25A11-11CC20-LH |
| GPM @ 1,800 rpm, Cover End | 3000 |
| Major Diameter [Min | 3000 |
| Integral Valve Configuration | 16.5 |
| Pump Series | 37.5 |
| Pilot Type | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 45° CW from Inlet |
| Shaft Length | Outlet Inline w/Inlet |
| Max. RPM [Max | 3/4 in Flange |
| Port Orientation - Shaft End | 1 1/4 in Flange |
| Minor Diameter | 2.2 |
