Daewoo Hydraulic Industrial Vane Pump T6 T7 Series With Low Noise
| GPM @ 1,800 rpm, Shaft End: |
3/16 in |
| Max. RPM [Max: |
Standard Blue Paint |
| Pilot Type: |
Axial Piston Pumps |
| Minor Diameter [Min: |
PVM018 |
| Shaft Dia.: |
33.0 LB |
| Port Size: |
Right Hand (CW) |
| Port Orientation - Shaft End: |
PVM018ER02AE01AAA07000000A0A |
| Displacement Shaft End (cu in/revolution): |
Tube Ports |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Shaft End |
3/16 in |
| Max. RPM [Max |
Standard Blue Paint |
| Pilot Type |
Axial Piston Pumps |
| Minor Diameter [Min |
PVM018 |
| Shaft Dia. |
33.0 LB |
| Port Size |
Right Hand (CW) |
| Port Orientation - Shaft End |
PVM018ER02AE01AAA07000000A0A |
| Displacement Shaft End (cu in/revolution) |
Tube Ports |
| Shaft Length |
Open Circuit Axial |
| GPM @ 1,800 rpm, Cover End |
1800 rpm |
| Shaft End RPM [Max |
4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
| Cover End Flow @ RPM |
SAE-20 |
| Cover End RPM [Max |
0.75 in |
| Port Orientation - Cover End |
3/4 |
| Pressure Port Size, Shaft End |
Straight Keyed |
| Shaft Type |
8.2 gpm @ 1750 rpm |
| Pump Series |
SAE-12 |
| Major Diameter [Max |
Electric Motor Speeds |
| Weight |
Pressure Compensator |
| Model No. |
0.94 in |
| Shaft End Flow @ RPM |
End Port |
| Shaft Key |
Buna-N |
| Seal Material |
3.25 in |
| Minor Diameter |
8.2 |
| Major Diameter [Min |
SAE A, 2 Bolt |
| Shaft Seal Type |
4 3/16 in |
| Controlled Flow Rate |
Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Relief Valve Setting |
SAE 19-1 |
| Port Type |
918 |
| Displacement Cover End (cu in/revolution) |
N/A |
| Spline Description |
5000 |
| Integral Valve Configuration |
22 hp |
| Mounting Flange |
PVM018ER02AE01AAA07000000A0A |
| Pressure Port Size, Cover End |
Single Pump, Non-Thru-Drive |
| Minor Diameter [Max |
1.1 |
| Cover End Pressure [Max |
62 |
| Manufacturer Part No. |
None |
| Rotation |
5000 psi |
| Shaft End Pressure [Max |
4000 |
| Mounting |
4600 |
| Pressure Compensator Setting |
70 Bar |