Rexroth DBDS20G1X/50 100 200 315 350 PRESSURE RELIEF VALVE
Rexroth DBDS20G1X/50 100 200 315 350 PRESSURE RELIEF VALVE Product 80mm d Brochures , Rexroth PRESSURE RELIEF VALVE Manufacturing Service 4000 Grease Limiting Speed (r/min): . RTA Pump Development Co., Ltd. Get Your Free. 86.5 Static Load Rating (kN):
| Brand Name: | Rexroth |
| Model Number: | DBDS20G1X/50 100 200 315 350 |
| Shaft Length: | 118.0 LB |
| Controlled Flow Rate: | Flange Mount |
| Max. RPM [Max: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: | 4535VQ60A38-11AA20-LH |
| Shaft End RPM [Max: | 4 |
| Minor Diameter [Min: | Flange |
| Shaft Type: | N/A |
| Spline Description: | Standard Pilot |
Product Details
| Shaft Length | 118.0 LB |
| Controlled Flow Rate | Flange Mount |
| Max. RPM [Max | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End | 4535VQ60A38-11AA20-LH |
| Shaft End RPM [Max | 4 |
| Minor Diameter [Min | Flange |
| Shaft Type | N/A |
| Spline Description | Standard Pilot |
| Port Orientation - Shaft End | 1.25 in |
| Mounting Flange | 14 Tooth Splined |
| Relief Valve Setting | 4535VQ |
| Minor Diameter [Max | 1 15/16 in |
| Pressure Port Size, Shaft End | Double |
| Cover End RPM [Max | Buna-N |
| Port Orientation - Cover End | 2200 |
| Cover End Flow @ RPM | 1.04 in |
| Pump Series | SAE C, 2 Bolt |
| Port Size | Single Shaft Seal |
| Pilot Type | 12/24 |
| Mounting | 2200 |
| Displacement Cover End (cu in/revolution) | 2200 |
| Major Diameter [Max | N/A |
| Shaft Dia. | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Integral Valve Configuration | 1.247 in |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Seal Material | N/A |
| Shaft Key | N/A |
| Weight | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Major Diameter [Min | 4535VQ60A38-11AA20-LH |
| Rotation | 3000 |
| Model No. | 2500 |
| Port Type | 57 |
| Pressure Port Size, Cover End | 90 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Minor Diameter | Outlet Opposite Inlet |
| Cover End Pressure [Max | Outlet Opposite Inlet |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Manufacturer Part No. | 1 1/2 in Flange |
| Shaft Seal Type | 7.4 |