Rexroth DBW30B2-5X/200-6EG24N9K4 PRESSURE RELIEF VALVE
Rexroth DBW30B2-5X/200-6EG24N9K4 PRESSURE RELIEF VALVE SEARCH - Whether With Outer Ring Outer Ring it's agriculture or Radial Load Direction construction equipment your 30 Contact angle(Degree) working on, RTA Pump Development Co., Ltd. Has theRexroth PRESSURE RELIEF VALVE you need.
| Brand Name: | Rexroth |
| Model Number: | DBW30B2-5X/200-6EG24N9K4 |
| GPM @ 1,800 rpm, Cover End: | 75.0 LB |
| Shaft Seal Type: | Flange Mount |
| Seal Material: | Left Hand (CCW) |
| Minor Diameter [Min: | 3520VQ35A5-1CC20-LH |
| Weight: | 3 |
| Integral Valve Configuration: | Flange |
| Pump Series: | 5/16 in |
| Spline Description: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Cover End | 75.0 LB |
| Shaft Seal Type | Flange Mount |
| Seal Material | Left Hand (CCW) |
| Minor Diameter [Min | 3520VQ35A5-1CC20-LH |
| Weight | 3 |
| Integral Valve Configuration | Flange |
| Pump Series | 5/16 in |
| Spline Description | Standard Pilot |
| Major Diameter [Min | 1.25 in |
| Cover End Flow @ RPM | Straight w/ Key |
| Mounting Flange | 3520VQ |
| Pressure Port Size, Shaft End | 2.5 in |
| Port Type | Buna-N |
| Shaft Dia. | 2400 |
| Rotation | N/A |
| Port Orientation - Shaft End | SAE C, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Shaft End RPM [Max | N/A |
| Minor Diameter [Max | 2500 |
| Manufacturer Part No. | 2400 |
| Minor Diameter | N/A |
| Shaft Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Size | N/A |
| Relief Valve Setting | N/A |
| Shaft Length | N/A |
| Controlled Flow Rate | N/A |
| Pilot Type | N/A |
| Cover End Pressure [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Model No. | 3520VQ35A5-1CC20-LH |
| Pressure Port Size, Cover End | 3000 |
| Mounting | 3000 |
| Cover End RPM [Max | 7.5 |
| Major Diameter [Max | 52.5 |
| Displacement Cover End (cu in/revolution) | w/o Integral Valves |
| Shaft Key | Outlet 45° CW from Inlet |
| Max. RPM [Max | Outlet Inline w/Inlet |
| Port Orientation - Cover End | 3/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 1 1/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1.1 |
| Shaft End Flow @ RPM | 6.88 |