Danfoss Shut-off valves 148B4611 STC 50 A ANG SHUT-OFF VALVE HANDWHEEL
Find the 17 mm da min discount Danfoss Shut-off valves 148B4611 STC 50 A ANG SHUT-OFF VALVE HANDWHEEL online RTA Pump Development Co., Ltd. you need . We offer ... 0.19 kN Fatigue limit load, Cu If you check out our large selection of Danfoss Shut-off valves 148B4611 STC 50 A ANG SHUT-OFF VALVE HANDWHEEL once .
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4611 STC 50 A |
| Pump Series: |
75.0 LB |
| Port Size: |
Flange Mount |
| Shaft End RPM [Max: |
Right Hand (CW) |
| Shaft Type: |
3520VQ38A11-11BB20 |
| Mounting: |
3 |
| Shaft Seal Type: |
Flange |
| Spline Description: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
Product Details
| Pump Series |
75.0 LB |
| Port Size |
Flange Mount |
| Shaft End RPM [Max |
Right Hand (CW) |
| Shaft Type |
3520VQ38A11-11BB20 |
| Mounting |
3 |
| Shaft Seal Type |
Flange |
| Spline Description |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Model No. |
1.25 in |
| Shaft End Flow @ RPM |
14 Tooth Splined |
| Port Type |
3520VQ |
| Pilot Type |
1 15/16 in |
| Cover End Pressure [Max |
Buna-N |
| Minor Diameter |
2400 |
| Shaft End Pressure [Max |
1.04 in |
| Controlled Flow Rate |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Relief Valve Setting |
12/24 |
| Mounting Flange |
2500 |
| Max. RPM [Max |
2400 |
| Shaft Length |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
1.248 in |
| Weight |
1.247 in |
| Port Orientation - Shaft End |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Orientation - Cover End |
N/A |
| Cover End RPM [Max |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Min |
3520VQ38A11-11BB20 |
| Integral Valve Configuration |
3000 |
| Shaft Dia. |
3000 |
| Major Diameter [Min |
16.5 |
| Minor Diameter [Max |
57 |
| Seal Material |
w/o Integral Valves |
| Shaft Key |
Outlet 45° CCW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
Outlet 90° CCW from Inlet |
| Manufacturer Part No. |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
2.22 |
| Rotation |
7.42 |