Rexroth ZDB10VPA2-4X/50 PRESSURE RELIEF VALVE
What Deep Groove Ball Bea Bearing Used is Rexroth ZDB10VPA2-4X/50 PRESSURE RELIEF VALVE in mechanical engineering? Rexroth PRESSURE RELIEF VALVE Manufacturing Service . Upload your RTA Pump Development Co., Ltd. CAD file VV (Non-Contact Rubb Seals for an instant.
| Brand Name: | Rexroth |
| Model Number: | ZDB10VPA2-4X/50 |
| GPM @ 1,800 rpm, Shaft End: | 45.0 LB |
| Port Type: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
| Major Diameter [Max: | 2520VQ21E11-11DD20 |
| Minor Diameter [Max: | 2 1/2 |
| Pressure Port Size, Cover End: | Flange |
| Minor Diameter [Min: | N/A |
| Cover End Flow @ RPM: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End | 45.0 LB |
| Port Type | Flange Mount |
| Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
| Major Diameter [Max | 2520VQ21E11-11DD20 |
| Minor Diameter [Max | 2 1/2 |
| Pressure Port Size, Cover End | Flange |
| Minor Diameter [Min | N/A |
| Cover End Flow @ RPM | Standard Pilot |
| Major Diameter [Min | 0.875 in |
| Pressure Port Size, Shaft End | 13 Tooth Splined |
| Mounting | 2520VQ |
| Seal Material | 1 3/8 in |
| Manufacturer Part No. | Buna-N |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Shaft End RPM [Max | 0.715 in |
| Rotation | SAE B, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Displacement Cover End (cu in/revolution) | 16/32 |
| Shaft Type | 2700 |
| Shaft End Pressure [Max | 2500 |
| Relief Valve Setting | N/A |
| Shaft Seal Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Weight | 0.873 in |
| Pump Series | 0.872 in |
| Shaft Key | N/A |
| Cover End Pressure [Max | N/A |
| Shaft End Flow @ RPM | N/A |
| Cover End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 2520VQ21E11-11DD20 |
| Max. RPM [Max | 3000 |
| Shaft Dia. | 3000 |
| Port Size | 16.5 |
| Minor Diameter | 31.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Shaft Length | Outlet 135° CW from Inlet |
| Mounting Flange | Outlet 90° CW from Inlet |
| Model No. | 1 1/16 in SAE O-Ring |
| Port Orientation - Cover End | 1 in Flange |
| Spline Description | 2.22 |
| Controlled Flow Rate | 4.12 |