Yuken PV2R12-6-47-F-RAA-40 Double Vane pump
What 4.01 Weight / LBS is 3.1 Inch | 78.5 Mill Bolt Spacing the best place RTA Pump Development Co., Ltd. to buy Yuken PV2R12-6-47-F-RAA-40 Double Vane pump online? Yuken Double Vane pump Manufacturing Service .
| Brand Name: | Yuken |
| Model Number: | PV2R12-6-47-F-RAA-40 |
| Minor Diameter: | 101.0 LB |
| Seal Material: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Shaft Key: | 4525VQ60A21-11DD20 |
| Shaft End RPM [Max: | 3.5 |
| Max. RPM [Max: | Flange |
| Cover End Flow @ RPM: | N/A |
| Mounting Flange: | Standard Pilot |
Product Details
| Minor Diameter | 101.0 LB |
| Seal Material | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Shaft Key | 4525VQ60A21-11DD20 |
| Shaft End RPM [Max | 3.5 |
| Max. RPM [Max | Flange |
| Cover End Flow @ RPM | N/A |
| Mounting Flange | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| Pilot Type | 4525VQ |
| Shaft Dia. | 1 15/16 in |
| Major Diameter [Min | Double |
| Port Size | Buna-N |
| Minor Diameter [Min | 2200 |
| Shaft End Pressure [Max | 1.04 in |
| Mounting | SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Pump Series | 12/24 |
| Spline Description | 2200 |
| Model No. | 2200 |
| Rotation | N/A |
| Port Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.248 in |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Manufacturer Part No. | N/A |
| Port Orientation - Cover End | N/A |
| Weight | N/A |
| Shaft Seal Type | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Shaft Length | 4525VQ60A21-11DD20 |
| Minor Diameter [Max | 3000 |
| Shaft Type | 2500 |
| Controlled Flow Rate | 31.5 |
| Cover End Pressure [Max | 90 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Relief Valve Setting | Outlet 135° CW from Inlet |
| Pressure Port Size, Shaft End | Outlet 90° CW from Inlet |
| Major Diameter [Max | 1 in Flange |
| Shaft End Flow @ RPM | 1 1/2 in Flange |
| Port Orientation - Shaft End | 4.1 |