CUMMINS 3071497 injector
QuestionCUMMINS 3071497 injector ? Find what you 43 mm B - Cone Width need RTA Pump Development Co., Ltd. faster by 180 mm d entering your CUMMINS injector information . JP18049P Cone Part Number
| Brand Name: | CUMMINS |
| Model Number: | 3071497 |
| Cover End RPM [Max: | 5/16 in |
| Shaft Dia.: | Standard Blue Paint |
| Model No.: | Axial Piston Pumps |
| Minor Diameter [Min: | PVM057 |
| Pressure Port Size, Shaft End: | 60.0 LB |
| Pump Series: | Right |
| Cover End Flow @ RPM: | PVM057ER09GS02AAA28000000A0A |
| Shaft Length: | Flange Ports |
Product Details
| Cover End RPM [Max | 5/16 in |
| Shaft Dia. | Standard Blue Paint |
| Model No. | Axial Piston Pumps |
| Minor Diameter [Min | PVM057 |
| Pressure Port Size, Shaft End | 60.0 LB |
| Pump Series | Right |
| Cover End Flow @ RPM | PVM057ER09GS02AAA28000000A0A |
| Shaft Length | Flange Ports |
| Rotation | Open Circuit Axial |
| Cover End Pressure [Max | 1800 rpm |
| Manufacturer Part No. | 14.3 gpm @ 1000 rpm, 17.4 gpm @ 1200 rpm, 22.4 gpm @ 1500 rpm, 27 gpm @ 1800 rpm |
| Mounting | 2 in SAE 4-Bolt Flange (Code 61) |
| Shaft Seal Type | 1.25 in |
| Weight | 1 1/4 |
| Major Diameter [Max | Straight Keyed |
| Max. RPM [Max | PVM Series Industrial Piston Pump |
| Seal Material | 27 gpm @ 1800 rpm |
| Minor Diameter | 1 in SAE 4-Bolt Flange (Code 61) |
| GPM @ 1,800 rpm, Shaft End | Electric Motor Speeds |
| Minor Diameter [Max | Pressure Compensator |
| Integral Valve Configuration | 2.2 in |
| Port Orientation - Cover End | Side |
| Shaft End Pressure [Max | Buna-N |
| GPM @ 1,800 rpm, Cover End | 5 in |
| Shaft Type | 27 |
| Port Size | SAE C, 4-Bolt |
| Major Diameter [Min | 6 3/8 in |
| Port Orientation - Shaft End | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Controlled Flow Rate | SAE C |
| Pilot Type | 3980 |
| Mounting Flange | N/A |
| Shaft Key | 5000 |
| Displacement Shaft End (cu in/revolution) | 70 hp |
| Shaft End RPM [Max | PVM057ER09GS02AAA28000000A0A |
| Displacement Cover End (cu in/revolution) | Single Pump, Non-Thru-Drive |
| Relief Valve Setting | 3.5 |
| Spline Description | 201 |
| Pressure Port Size, Cover End | None |
| Shaft End Flow @ RPM | 5000 psi |
| Port Type | 4568 |
| Intermittent Pressure [Max | 4600 |
| Pressure Compensator Setting | 280 Bar |