DEUTZ 0 445 120 054 injector
QuestionDEUTZ 0 445 120 054 injector ? RTA Pump Development Co., Ltd. Find what you need faster by entering your DEUTZ injector information Click here manufacturer product page: 1 number of rows: .
| Brand Name: | DEUTZ |
| Model Number: | 0 445 120 054 |
| Max. RPM [Max: | 15.0 LB |
| Minor Diameter [Min: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 6 gal/min @ 1200 rpm |
| Model No.: | 1 |
| Relief Valve Setting: | NPT |
| Cover End Flow @ RPM: | N/A |
| Major Diameter [Min: | 20 |
Product Details
| Max. RPM [Max | 15.0 LB |
| Minor Diameter [Min | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 6 gal/min @ 1200 rpm |
| Model No. | 1 |
| Relief Valve Setting | NPT |
| Cover End Flow @ RPM | N/A |
| Major Diameter [Min | 20 |
| Minor Diameter [Max | 6 gpm @ 1200 rpm |
| Minor Diameter | 0.73 in |
| Shaft End RPM [Max | 11 Tooth Splined |
| Shaft Type | 9 gpm @ 1750 rpm |
| Controlled Flow Rate | V10 |
| Cover End Pressure [Max | 1 1/4 in |
| GPM @ 1,800 rpm, Shaft End | Single |
| Cover End RPM [Max | 1/2 in NPT |
| Port Type | Buna-N |
| Shaft Seal Type | 3000 |
| Spline Description | 2200 psi |
| Pilot Type | 9 |
| Rotation | P |
| Shaft Dia. | SAE A, 2 Bolt |
| Shaft Length | P |
| Port Orientation - Shaft End | 1 |
| Shaft End Flow @ RPM | Inline w/ Inlet |
| Pump Series | 1.2 |
| Mounting Flange | 6 gal/min |
| Mounting | Flow Control & Relief |
| Manufacturer Part No. | 1750 psi |
| Major Diameter [Max | 38C |