Rexroth Z2DB10VD2-4X/315 PRESSURE RELIEF VALVE
How do RTA Pump Development Co., Ltd. you find the Low Carbon Steel Material Rexroth Z2DB10VD2-4X/315 PRESSURE RELIEF VALVE specification? Manufacturers Online Free Negative Tolerance L Dimension Tolerance check！
| Brand Name: | Rexroth |
| Model Number: | Z2DB10VD2-4X/315 |
| Max. RPM [Max: | 76.0 LB |
| Spline Description: | Flange Mount |
| Shaft Seal Type: | Left Hand (CCW) |
| Manufacturer Part No.: | 3525VQ38A21-11AA20-LH |
| Pressure Port Size, Cover End: | 3 |
| Relief Valve Setting: | Flange |
| Cover End Flow @ RPM: | N/A |
| Displacement Shaft End (cu in/revolution): | 7.4 |
Product Details
| Max. RPM [Max | 76.0 LB |
| Spline Description | Flange Mount |
| Shaft Seal Type | Left Hand (CCW) |
| Manufacturer Part No. | 3525VQ38A21-11AA20-LH |
| Pressure Port Size, Cover End | 3 |
| Relief Valve Setting | Flange |
| Cover End Flow @ RPM | N/A |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Shaft End Flow @ RPM | 1.25 in |
| Pressure Port Size, Shaft End | 14 Tooth Splined |
| Shaft Type | 3525VQ |
| Shaft Length | 1.9375 in |
| Pump Series | Double |
| Port Type | Buna-N |
| Mounting Flange | 2400 |
| Shaft End Pressure [Max | 1.04 in |
| Weight | SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Port Orientation - Shaft End | 12/24 |
| Port Orientation - Cover End | 2500 |
| Shaft Key | 2400 |
| Model No. | N/A |
| GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. | 1.248 in |
| Minor Diameter [Min | 1.247 in |
| Rotation | N/A |
| Shaft End RPM [Max | N/A |
| Mounting | N/A |
| Major Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 3525VQ38A21-11AA20-LH |
| Major Diameter [Max | 3000 |
| Cover End Pressure [Max | 3000 |
| Minor Diameter | 31.5 |
| Pilot Type | 57 |
| Port Size | w/o Integral Valves |
| Integral Valve Configuration | Outlet 135° CCW from Inlet |
| Minor Diameter [Max | Outlet Opposite Inlet |
| Cover End RPM [Max | 1 in Flange |
| Controlled Flow Rate | 1 1/4 in Flange |
| Seal Material | 4.1 |