Rexroth PVQ54-1X/139-082RA15UUMC Vane pump
With over 10170 full-service stores, our Rexroth PVQ54-1X/139-082RA15UUMC Vane pump inventory is extensive and our parts are priced right. within 24 hours. This helps you RTA Pump Development Co., Ltd. maximize your productivity by saving time and your 26,5 Width (mm) hard-earned 30 Bore Diameter (mm) dollars.
| Brand Name: |
Rexroth |
| Model Number: |
PVQ54-1X/139-082RA15UUMC |
| Weight: |
118.0 LB |
| Rotation: |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| Controlled Flow Rate: |
4535VQ60A25-1CC20 |
| Pump Series: |
4 |
| Max. RPM [Max: |
Flange |
| Major Diameter [Min: |
5/16 in |
| Shaft Key: |
Standard Pilot |
Product Details
| Weight |
118.0 LB |
| Rotation |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| Controlled Flow Rate |
4535VQ60A25-1CC20 |
| Pump Series |
4 |
| Max. RPM [Max |
Flange |
| Major Diameter [Min |
5/16 in |
| Shaft Key |
Standard Pilot |
| Port Orientation - Shaft End |
1.25 in |
| Shaft End RPM [Max |
Straight w/ Key |
| Manufacturer Part No. |
4535VQ |
| Spline Description |
1 15/16 in |
| Shaft Type |
Double |
| Minor Diameter [Min |
Buna-N |
| Pilot Type |
2200 |
| Pressure Port Size, Shaft End |
N/A |
| Cover End Pressure [Max |
SAE C, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Model No. |
2200 |
| GPM @ 1,800 rpm, Cover End |
2200 |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Seal Material |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Port Type |
N/A |
| Major Diameter [Max |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Integral Valve Configuration |
4535VQ60A25-1CC20 |
| Shaft Dia. |
3000 |
| Shaft Seal Type |
2500 |
| Mounting |
37.5 |
| Relief Valve Setting |
90 |
| Port Size |
w/o Integral Valves |
| Cover End RPM [Max |
Outlet Inline w/Inlet |
| Minor Diameter |
Outlet Inline w/Inlet |
| Mounting Flange |
1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Port Orientation - Cover End |
5 |