DEUTZ 0 445 110 531 injector
Browse DEUTZ 0 445 110 531 injector RTA Pump Development Co., Ltd. Categories 4 Number of Mounting Holes in the Manufacturers Flange Block Bearing Category Online Free. including DEUTZ injector.
What is 0 445 110 531 bearing interchange？
| Brand Name: | DEUTZ |
| Model Number: | 0 445 110 531 |
| Displacement Shaft End (cu in/revolution): | 76.0 LB |
| Shaft Dia.: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Shaft Seal Type: | 3525VQ38A21-1BB20 |
| GPM @ 1,800 rpm, Shaft End: | 3 |
| Max. RPM [Max: | Flange |
| Controlled Flow Rate: | 5/16 in |
| Minor Diameter: | Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) | 76.0 LB |
| Shaft Dia. | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Shaft Seal Type | 3525VQ38A21-1BB20 |
| GPM @ 1,800 rpm, Shaft End | 3 |
| Max. RPM [Max | Flange |
| Controlled Flow Rate | 5/16 in |
| Minor Diameter | Standard Pilot |
| Pressure Port Size, Cover End | 1.25 in |
| Displacement Cover End (cu in/revolution) | Straight w/ Key |
| Shaft Key | 3525VQ |
| Port Orientation - Shaft End | 2.5 in |
| Pump Series | Buna-N |
| Cover End RPM [Max | 2400 |
| Mounting Flange | N/A |
| Weight | SAE C, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Shaft Type | N/A |
| Pilot Type | 2500 |
| Shaft Length | 2400 |
| Manufacturer Part No. | N/A |
| Mounting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation | N/A |
| Major Diameter [Min | N/A |
| Port Type | N/A |
| Relief Valve Setting | N/A |
| Port Orientation - Cover End | N/A |
| Port Size | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Major Diameter [Max | 3525VQ38A21-1BB20 |
| Seal Material | 3000 |
| Pressure Port Size, Shaft End | 3000 |
| Cover End Pressure [Max | 31.5 |
| Model No. | 57 |
| Minor Diameter [Min | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 45° CCW from Inlet |
| Spline Description | Outlet 90° CCW from Inlet |
| Shaft End RPM [Max | 1 in Flange |
| Shaft End Flow @ RPM | 1 1/4 in Flange |
| Minor Diameter [Max | 4.12 |
| Shaft End Pressure [Max | 7.42 |
